ZyXEL P-662H-61 User Guide - Page 147
Configuring Port Forwarding
View all ZyXEL P-662H-61 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Chapter 9 Network Address Translation (NAT) Screens 9.5 Configuring Port Forwarding " The Port Forwarding screen is available only when you select SUA Only in the NAT > General screen. " If you do not assign a Default Server IP address, the ZyXEL Device discards all packets received for ports that are not specified here or in the remote management setup. Click Network > NAT > Port Forwarding to open the following screen. See Appendix F on page 423 for port numbers commonly used for particular services. Figure 85 NAT Port Forwarding The following table describes the fields in this screen. Table 53 NAT Port Forwarding LABEL DESCRIPTION Default Server Setup Default Server In addition to the servers for specified services, NAT supports a default server. A default server receives packets from ports that are not specified in this screen. If you do not assign a Default Server IP address, the ZyXEL Device discards all packets received for ports that are not specified here or in the remote management setup. Port Forwarding Service Name Select a service from the drop-down list box. Server IP Address Enter the IP address of the server for the specified service. Add Click this button to add a rule to the table below. P-662H/HW-D Series User's Guide 147