ZyXEL P-870HW-I1 User Guide - Page 89
Table 18, WAN Configuration: IPoA
View all ZyXEL P-870HW-I1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Chapter 5 WAN Setup Table 17 WAN Configuration: IPoE LABEL DESCRIPTION WAN IPv6 Enter the bit number of the IPv6 subnet mask provided by your ISP. Subnet Prefix Length Static WAN Enter the gateway IPv6 address provided by your ISP. Gateway IPv6 Address 6RD (6to4 Tunneling) Select this option to enable IPv6 to IPv4 tunneling. This will encapsulate IPv6 to IPv4 packets. 6RD Endpoint IP Address 6RD IPv6 Prefix Back Next Select Set by DCHP if you want to obtain a 6RD endpoint IP address from a DHCP server. Select Manual Setting to specify the 6RD endpoint IP address manually. If you enabled 6RD, specify the 6RD endpoint IP address. If you enabled 6RD, specify the IPv6 prefix for the endpoint IP address. Click this button to return to the previous screen. Click this button to continue. IPoA Figure 39 This screen displays only when you set the DSL link type to IPoA for the ATM interface and configure a WAN connection using the ATM interface. The following table describes the labels in this screen. Table 18 WAN Configuration: IPoA LABEL DESCRIPTION WAN IP Address Enter the static IP address provided by your ISP. WAN Subnet Mask Enter the subnet mask provided by your ISP. Unnumbered Mode Select this if your ISP provided a range of static public IP addresses for you to use. Gateway IP Address Enter the Device's WAN IP address. P-870HN-5xb User's Guide 89