iRobot Scooba 350 Quick Start Guide - Page 3
Fill Scooba's Tank - battery
View all iRobot Scooba 350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3 3 Place battery in Scooba by rotating the battery into its slot, making sure the yellow tabs fit inside the guide holes. 4 Plug the Power Supply into Scooba to charge the battery. For best performance, iRobot recommends charging Scooba's battery overnight the first time only. Fill Scooba's Tank 1 2 3 Power Button Light Red Green pulse Green fast pulse Solid Green Blinking Red Battery Status Battery empty Charging 16-hour refresh charge Fully charged Battery not installed 3 Open Scooba's tank. 4 Lift the tank clear of the robot and place the tank on a flat surface. Using the included measuring cup, measure and pour Clorox® Scooba cleaning solution into the Clean tank. 5 6 Slowly fill the remainder of the Clean Secure the tank cap and place tank with warm or cold tap water. Tilt the tank back in the tank holder. the tank and ensure it is completely filled to the top. Close the tank by pressing down on the tank. You will hear a click when the tank is properly installed. Use of plain tap water or extremely small amounts of cleaning solution reduces Scooba's ability to recognize water in the Clean tank. Always use the recommended amount of cleaning solution and water. Instructional videos available at www.irobot.com/usetips