2009 Acura TL Owner's Manual - Page 567

Main Menu Table Of Contents Lights, Cleaning the Seat Belts 6. Push a new bulb straight into the socket until it bottoms, and reinstall the socket into the light assembly by turning it clockwise until it locks. 7. Test the new bulb to make sure it works. 8. Reinstall the trunk lining. Make sure it is installed under the edge of the trunk seal. BULB SOCKET Cleaning the Seat Belts OPENING 4. Determine which of the three bulbs is burned out: back-up light, turn signal, or side marker. 5. Remove the socket by turning it one-quarter turn counterclockwise, and pull the bulb straight out of its socket. 9. Put the holding clip into the hole on the side of the trunk lining. Reinstall the screw. If your seat belts get dirty, use a soft brush with a mixture of mild soap and warm water to clean them. Do not use bleach, dye, or cleaning solvents. Let the belts air-dry before you use the vehicle. 564 2009 TL