2008 BMW 3 Series Owner's Manual - Page 103

5. If necessary, move the highlight marker to the uppermost field. Turn the controller until "Lighting" is selected and press the controller. 6. Select "Pathway lighting" and press the controller. 7. Turn the controller to select the corresponding duration. 8. Press the controller to apply the setting. The setting is stored for the remote control currently in use. Daytime running lamps The daytime running lamps light up in switch position 0, 1 and 3. They are less powerful than the low beams. 6. Select "Welcome light" and press the controller. The welcome lamps are switched on. The setting is stored for the remote control currently in use. Activating/deactivating daytime running lamps iDrive, for operating principle refer to page 16. 1. Open the start menu. 2. Press the controller to open the menu. 4. Select "Vehicle / Tires" and press the controller. 5. Select "Lighting" and press the controller. 3. Select "Settings" and press the controller. Pathway lighting If you activate the headlamp flasher after parking the car, with the lights switched off, the low beams come on and remain on for a certain time. You can adjust the operating period or deactivate the function. iDrive, for operating principle refer to page 16. 1. Press the button. This opens the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Vehicle / Tires" and press the controller. 5. Select "Lighting" and press the controller. 6. Select "Daytime running lamps" and press the controller. The daytime running lamps are switched on. The setting is stored for the remote control currently in use. Adaptive Head Light* The concept Adaptive Head Light is a variable headlamp control system that enables better illumination 101 Online Edition for Part no. 01 41 0 014 258 - © 08/07 BMW AG Reference Mobility Communications Entertainment Navigation Driving tips Controls At a glance