2009 BMW 1 Series Owner's Manual - Page 70
2009 BMW 1 Series Manual
Page 70 highlights
Technology for driving comfort and safety Tire Pressure Monitor TPM* The concept TPM checks the inflation pressures of the four mounted tires. The system notifies you if there is a significant loss of pressure in one or more tires. sponding symbol appears in the display accompanied by the word "RESET". Functional requirement In order to assure the reliable reporting of a flat tire, the system must be reset while all tire inflation pressures are correct. Always use wheels with TPM electronics. Otherwise, the system may malfunction. Each time a tire inflation pressure has been corrected or a wheel or tire has been changed, reset the system.< 3. Press button 2 to confirm your choice of the Tire Pressure Monitor. The following display appears: System limitations TPM cannot warn you in advance of sudden severe tire damage caused by outside influences.< The system does not work correctly if it has not been reset; for example, a flat tire may be indicated even though the tire inflation pressures are correct. The system is inactive and cannot indicate a flat tire if a wheel without TPM electronics, such as a compact spare wheel, has been mounted, or if TPM is temporarily malfunctioning due to other systems or devices using the same radio frequency. 4. Press button 2 for approx. 5 seconds, until the reading shown below is displayed: Resetting the system Each time a tire inflation pressure has been corrected or a wheel or tire has been changed, reset the system.< For operating principle refer to page 59. 1. Start the engine, but do not start driving. 2. Lightly push button 1 in the turn indicator lever up or down repeatedly until the corre5. Start to drive. After driving a few minutes, the set inflation pressures in the tires are accepted as the target values to be monitored. The system reset is completed during your drive, and can be interrupted at any time. When driving resumes, the reset is continued automatically. The indicator lamp goes out after the system reset is completed. 68 Online Edition for Part no. 01 41 2 600 853 - © 08/08 BMW AG