2009 BMW 6 Series Owner's Manual - Page 53
2009 BMW 6 Series Manual
Page 53 highlights
Seat, mirror and steering wheel memory the steering wheel adjustment in any direction, refer to page 56. Safety feature 1. Close the driver's door and switch ignition on or off, refer to page 60. If the button was pressed inadvertently: press the button again; the LED goes out. You can store and select three different adjustment settings for the driver's seat, exterior mirrors and steering wheel. The adjustment of the lumbar support is not stored in the memory. The last positions of the driver's seat, external rearview mirrors, and steering wheel are stored for the remote key currently in use. You can select* when the position is requested. > Request when unlocking vehicle > Request when opening driver's door. In the Convertible, only this function is used. When using this feature, always make sure that the footwell behind the driver's seat is empty and unobstructed. Failure to do so could cause injury to persons or damage to objects behind the seat as a result of a rearward movement of the seat.< The system cancels the adjustment procedure when you briefly press one of the seat adjustment switches or one of the memory buttons. iDrive, for operating principle refer to page 16. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Vehicle / Tires" and press the controller. Storing 1. Switch on radio readiness or ignition, refer to page 60. 2. Set the desired seat, exterior mirror and steering wheel positions. 3. Press the button: The LED in the button lights up. 4. Press the desired memory button 1, 2 or 3: The LED goes out. Requesting Do not request a position from the memory while the vehicle is moving. There is a risk of accident from unexpected movement of the seat or steering wheel.< Comfort mode 1. Open the driver's door after unlocking or switch on radio readiness, refer to page 60. 2. Briefly press the desired memory button 1, 2 or 3. The system cancels the adjustment procedure when you briefly press one of the seat adjustment switches or one of the memory buttons. The adjusting procedure for the steering wheel is interrupted if you briefly press the switch for 51 Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG Reference Mobility Communications Entertainment Navigation Driving tips Requesting with remote control Controls 2. Press the desired memory button 1, 2 or 3 and maintain pressure until the adjustment process has been completed. At a glance