2009 BMW M5 Owner's Manual - Page 85
2009 BMW M5 Manual
Page 85 highlights
1. Hold the vehicle with the brake. 2. Release the brake and begin to drive immediately. After releasing the brake, begin to drive immediately; otherwise, the starting assistant no longer holds the vehicle after approx. 2 seconds and your vehicle will start to roll backward.< Start off quickly on slopes. Do not hold the vehicle on a hill by pressing the accelerator, but apply the footbrake or handbrake instead. Otherwise overheating and heavy wear can result in the area of the Sequential Manual Transmission.< To protect the clutch of the Sequential Manual Transmission from overheating, the starting-off behavior is changed under heavy loading, e.g. a rapid succession of starts on slopes. This can be noticed from shaking during starting off. ically adjusts to the new conditions within a fraction of a second. You can choose from three programs. "Comfort" program Select the "Comfort" program if you want comfort-oriented coordination of shock absorbers and steering. "Normal" program The "Normal" program offers control that is balanced between comfort and sportiness. "Sport" program Select the "Sport" program if you want a consistently sporty coordination of shock absorbers and steering. Selecting program Sequential Manual Transmission with Drivelogic: Navigation Reference Mobility Communications Entertainment 83 On a slippery surface 1. Select the "P 400" program of M Engine Dynamic Control, refer to page 60. 2. Gently press accelerator pedal to prevent wheels from spinning when starting off. Clutch protection with manual transmission Be sure to avoid riding the clutch for longer periods. Your BMW M5 is equipped with an overload protection for the clutch. Riding the clutch for longer periods is detected and the engine management system limits the engine speed to protect the clutch. This can result in the vehicle failing to accelerate when the clutch pedal is partially depressed. Manual transmission: EDC Electronic Damping Control The concept If the influencing variables such as road surface quality or operating conditions such as steering, braking etc. change, the damping automat- Press the EDC button repeatedly: > "Comfort": LED off. > "Normal": one LED lights up. > "Sport": both LEDs light up. Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG Driving tips Controls At a glance