2009 BMW M6 Owner's Manual - Page 66
2009 BMW M6 Manual
Page 66 highlights
Driving D Drive mode In the Drive mode, all forward gears are shifted automatically. Shifting from Sequential mode to Drive mode: shift using the shift paddles or the selector lever, or press the selector level to the right in the D/S direction. Shifting back to Drive mode: press the selector lever to the right in the D/S direction again. Kick-down: for rapid acceleration, e.g. when passing, press the accelerator pedal as far down as it will go. You achieve maximum acceleration. Using shift paddles on steering wheel > To upshift, briefly pull the right shift paddle +. > To downshift, briefly pull the left shift paddle -. Displays in instrument cluster Drivelogic With Drivelogic various driving programs are available to you. Each time you change between the Sequential mode and the Drive mode, the driving program last selected in the respective mode is active. Exception: after the first change from the Sequential to the Drive mode, driving program 3 is active. 1 2 Gear 1 to 7, R, N engaged Selected driving program, matches the number of illuminated fields, refer to Drivelogic on page 64 In drive mode, the currently selected gear followed by a D is displayed. In Drive mode There are five different driving programs, ranging from relaxed 1 to sporty/highly dynamic 5. 3 In Sequential mode You can choose from six driving programs from balanced/dynamic 1 to sporty/purist 6. Program 6 is only available when the DSC Dynamic Stability Control is deactivated, refer to page 84. If DSC is activated, then the system switches from program 6 to program 5. To maintain vehicle stability, always activate DSC whenever possible.< The gear display flashes when you open the driver's door with the engine running. If you do not subsequently operate the pedals, shift paddles, or selector lever, then the system shifts into N.< Gear changes Using selector lever > To upshift, pull the selector lever back. > To downshift, push the selector lever forward. Selecting driving program with button in center console Press the button repeatedly until the desired drive program is displayed in the instrument cluster, refer to page 64. 64 Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG