2010 BMW M3 Owner's Manual - Page 234
2010 BMW M3 Manual
Page 234 highlights
Replacing components 1. Turn the wheel inwards. 2. Open the flap in the wheel well. To do so, turn the fastener counterclockwise using a coin, for example. 1. Remove the cover for the high-beam headlamp. 2. Pull out the bulb socket, see arrow. 3. Remove and replace the bulb. Changing low-beam and high-beam bulbs 1. Remove the relevant cover for the headlamp. 2. Disconnect the plug from the lamp. 3. Push the wire bracket to the side out of the mounting, arrow 1, and fold it down, arrow 2. 4. Insert bulb socket. 5. Reattach the cover. Turn signals, front PY24W bulb, 24 watts 1. Open the flap in the wheel well, refer to Access through the wheel well on page 231. 4. Remove the bulb. 5. Insert new bulb as shown in the detail of the illustration above. 6. Fold up the wire bracket and engage it. 7. Connect the plug. 8. Reattach the cover. 2. Rotate turn signal bulb socket 1 to the left and remove. 3. Apply gentle pressure to the bulb while turning it to the left for removal and replacement. 4. Insert turn signal bulb socket 1. 5. Attach the flap to the wheel well. Parking lamps, roadside parking lamps W5W bulb, 5 watts Tail lamps Sedan > Brake lamp in the trunk lid: H21W bulb, 21 watts 232 Online Edition for Part no. 01 41 2 603 066 - © 08/09 BMW AG