2010 BMW M6 Owner's Manual - Page 207

License plate lamps Preparation 5-watt bulb, W5W 1. Push a screwdriver from the left under the lamp and pry out the lamp toward the right. 2. Turn the bulb holder to the left by 90 5 and remove. 3. Remove and replace the bulb. The M Mobility System is located in the cargo area under the floor panel flap. Do not remove foreign bodies which have penetrated the tire if possible. Corresponding information on using the M Mobility System is also provided on the device.< Before using the M Mobility System, observe the information on the sealant bottle.< Pull the sticker for the speed limit off the sealant bottle and apply it to the steering wheel. Please observe the best-by date on the sealant bottle.< 205 Online Edition for Part no. 01 41 2 602 735 - © 08/09 BMW AG Reference Mobility Safety measures in case of a breakdown: Park the vehicle as far as possible from passing traffic and on solid ground. Switch on the hazard warning flashers. Apply the parking brake and shift into first gear or reverse with the manual transmission, or move the selector lever into a drive position with the sequential transmission. Have all vehicle occupants get out of the vehicle and ensure that they remain outside the immediate area in a safe place, such as behind a guardrail. If a warning triangle* or portable hazard warning lamp* is required, set it up on the roadside at an appropriate distance from the rear of the vehicle. Comply with all safety guidelines and regulations.< The M Mobility System consists of 1 2 Sealant bottle and sticker with speed limit Filling hose from sealant bottle to wheel Communications Entertainment To repair a flat tire, an M Mobility System is provided in the BMW M6. Using this system you can apply a sealant in the inside of the tire, seal off the damaged area, restore the tire inflation pressure and then continue driving. Navigation Repairing flat tire with M Mobility System Driving tips Controls At a glance