1993 Buick Park Avenue Owner's Manual - Page 151

Once the tapeis playing, use the upper and lower knobs for volume, and fade justas you did for radio. The arrow in the graphic.display above word TAPE indicates the which side of the tape is being played. When the end of the tape is reached, itwill automatically reverseand play the other side the tape. of PREV To hear apassage on the tape has just played, press that PREV and the tape will back up and stop, at either the first 4-second quiet spot in the tape, or when you press PROG or PREV again. PROG To go from one sideof the tape tothe other, press the PROG button. ThePROG button will also stopREV, FWD, PREV orNEXT and play the tape, Cr02 This button sets the tape bias. When playing high bias chrome or metal tapes, press the button to turn the Cr02 on. Cr02 will appear in the display. When playing standard bias tapes, press again to turn the Cr02 off. NEXT To go directly to the next selection on the tape,press NEXT. A 4-second quiet interval must be present for the tape to stop. Pressing PROG or NEXT again will play the tape. EJECT To remove or stop thetape and switch to radio,press the EJECT button. REV To reverse the tape, press REV and the tape will rapidly reverse to the beginning of the tape or until you press the PROG or REV button again. The radiowill play during reverse. FWD To advance the tape, press FWD and the tape will rapidly go forward to the end of the tape, oruntil you press the PROG orFWD button again. The radiowill play during forward. ST-PL To immediately switch from tape to radio, press the ST-PL button and the radio will resume playing the station that was tuned in when you inserted a tape. Pressing ST-PL again will resume playing the tape where it was stopped.