1996 Buick LeSabre Owner's Manual - Page 127

Dual Automatic ComforTemp Climate Control (Option) If your Buick has the dual automaticcomfortemp climate control option, the following information tells you how it works. If the display is flashing after the system is started, you should see your dealer forservice. Temperature Button To adjust the temperature you want maintained inside the vehicle, push the TEMP button. If you want warmer air, push the red arrow. If you want cooler air, push the blue arrow. Note the degree selection on the display. You will hear a beep each time a button is pushed and a small light on the button will indicate which buttons are active. The lights areon all buttons except TEMP, FAN and AIR FLOW. The display will show fan, temperature and mode settings fora few seconds whenever AUTO is selected, and then display the outside temperature. The outside temperaturereading is most accurate when driving. During stops, the displayshows the previous temperature forbest accuracy and system control. Fan Button The speed of the blower fan is controlled automatically if AUTO. Pressing the FAN you have the system set for button will display and hold the current blower fan setting. If you want the blower fan to run at a lower speed, push the bottom of the FAN button. The fan speed will decrease with every push of the button until the lowest speed is reached. If you want to increase the fan speed, push the top of the FAN button. Notice the fan indicators on the display. Mode Controls Your comfort control system has different buttons that allow air delivery through the floor, middle or windshield outlets. The system will stay in theselected mode if a different button is pressed or the AUTO button is pressed. 3-3