1996 Buick Regal Owner's Manual - Page 93

If a bulb is burned out, replace itto help avoid an accident. If the arrows don't go on at all when you signal a turn, check for burned-outbulbs and check the fuse (see "Fusesand Circuit Breakers'' in the Index). Windshield Wipers To control the windshield wipers, turn the band marked WIPER. For a single wiping cycle,turn the band to MIST. Hold it there until the wipers start, then let go. The wipers will stop after one cycle. If you want more cycles,hold the band on MIST longer. For steady wiping at low speed, turn the band to LO. For high-speed wiping, turn the band further, to HI. To stop the wipers, turn the band to OFF. You can set the wiper speed for a long or short delay between wipes. This canbe very useful in light rain or snow. Turn the band to choose the delay time. The closer to LO, the shorter the delay. Be sure to clear ice and snow from the wiper blades before using them. If they're frozen tothe windshield, carefully loosen or thaw them. If your blades do become damaged, get new blades or blade inserts. A chime will sound if you leave your turn signal on for more than 1/2 mile (0.8 km). Headlamp High/Low Beam To change your headlamps from low beam to high beam, or high to low, pull the multifunction leverall the way toward you. Then release it. When the high beams are on, alight on the instrument panel alsowill be on.