1996 Buick Roadmaster Owner's Manual - Page 90

Turn Signal and Lane Change Indicator The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or lane change. a To signal a turn, movethe lever allthe way up or down. When the turn is finished, the lever will return automatically. An arrow on the instrument panel will flash the in If a bulbis burned out, replace to help avoid an it accident. If the arrows don't go on all when you at signal a turn, check for burned-out bulbs and check the fuse (see "Fuses and Circuit Breakers" in the Index). If you have a trailer towing option with added wiring for the trailer lamps, a different turn signal flasher is used. With this flasher installed, the signal indicator will flash even if a turn signal bulbburned out. Check the front is and rear turn signal lamps regularlymake sure they to are working. A chime will sound your turn signal remains after if on having driven 1/2 mile (0.8 km), to remind you to turn off your signal. Headlamp Highbow Beam Changer To change the headlamps from low beam to high or high to low, pull the turn signal lever all the way toward you. Then release it. When the high beams are on, this light on the instrument panel will also be on. To signal alane change, just raise or lower the lever until the arrow starts to flash. Holdthere untilyou it complete your lane change. lever will return by The itself when you release it. As you signal a turn a lane change, the arrows don't or if flash but just stay on, a signal bulb may be burned out and other drivers won't see your turn signal.