1997 Buick LeSabre Owner's Manual - Page 136

Temperature Button To adjust the comfort level you want maintained inside the vehicle, push the TEMP button. If you want a warmer comfort level, push the red arrow. If you want a cooler comfort level, pushthe blue arrow. Your comfort setting is shown in the display. If the display is flashing after the climate control system is started, there is a problem with the system and you should see your dealer for service. Sun and temperature sensors automatically adjust the air temperature, the airflow direction and the fan speed to maintain your comfort setting. Thesystem may supply cooler air to the side the vehicle toward of the sun. Be careful not to put anything over the sensors on top of the dash. Fan Button The speed of the blower fan is controlled automatically if you have the system set for AUTO. Pressing the FAN button will display and hold the current blower fan setting. If you want the blowerfan to run at a lower speed, push the bottom of the FAN button. The fan speed will decrease with every push of the button until the lowest speed is reached. If you want to increase the fan speed, push the top of the FAN button. Notice the fan indicators in the display. Mode Controls Press the AIR FLOW button to deliver air through the will stay floor, middle or windshield outlets. The system in the selected mode until the AUTO button is pushed. Press the up arrow on the AIR FLOW button to cycle through the available modes. 3-4