1998 Buick Park Avenue Owner's Manual - Page 16

P a . Adjust the driver's seat and lumbar position (if equipped) to a safe and comfortable driving position. Adjust both outside mirrors to suit you. See "Outside Mirrors" in the Index. Press one of the two MEMORY buttons corresponding with your driver number, for longer than three seconds. You will hear two beeps to confirm that the mirror and seat positions have been entered into memory. 4. Press WLOCK on the transmitter within five seconds. The EXIT button ~ B Q W S for easy exit from the vehicle. Push and release the EXIT button while inPARK (a> and the seat will move all the way back. You will hear a beep whenthe EXIT button is pressed. You can also set unique exit positions by moving the seat to the desired position, and then pushing and holding the EXIT button for greater than three seconds. You will hear two beeps to confirm the position has been set. The exit position will be set €or the previously identified driver. If the ignition is not in RUN, automatic seat and III~IX-Q~ movement will occur if the UNLOCK button on the remote keyless entry transmitter is pressed. Automatic seat and mirror movement is programmed through the Driver Information Center (DIC) so that the driver can select whether the seat moves to the programmed driving position, the programmed exit position, or does not move at all. For memory seat and mirror recall programming instructions, see "DIC Personal Choice Programming" in the Index. When your vehicle is in PARK (P), push and release the memory button youjust stored. The seat and mirrors will move to the set position. You will hear one beep. 'Tosct the seat and mirror positions for a second driver, foilow the previous steps, but use the other MEMORY button. I f you press thc wrong MEMORY button, or if there is a third ~iriver, S C t.tre: seat adjuster. U 4 -4, ..., ..