1998 Buick Park Avenue Owner's Manual - Page 72

To change modes: I . Close all the doors and turn the ignition OE. Keep all doors dosed throughout this procedure. Operation 0 No automatic door lock or unlock. All doors automaticaily lock when shifted out of PARK (P). No automatic door UdQCk. A11 doors automatically lock when shifted out of BARK (P). Only the driver's door automatically unlocks when shifted into PARK (B). AI1 doors automatically lock when shifted out of PARK (B). All doors automatically unlock when shifted into PARK (P). 2. Press and hold LOCK on the power door lock switch on the driver's door through Step 4. 3. Press the LOCK button on the remote keyless entry transmitter to enter the programming mode. The memory door lock mode will remain in the current mode. 4. Press the LOCK button on the transmitter again. E 2 Each time the transmitter's LOCK button is pressed, the mode will advance by one, going from mode 3 to mode 0 to mode 1, etc. 3 Vehicies are delivered programmed in Mode 3; however, each remote keyless entry transmitter can be programmed to a different mode according to the trser's preference. For each press of the LOCK button, the door locks will activate in the same manner they would activate in the corresponding memory door lock mode. For example, pressing the LOCK button on the transmitter to advance to mode 2 would result in a11 doors lockicg aimd then. only the driver's door would unlock. For Mode 0, no locking or unlocking Will QCCUT. 5. Release the power door lock switch md turn the ignition of.. The automatic door locks will remain in the most recentmode selected.