1998 Buick Riviera Owner's Manual - Page 106

Resuming a Set Speed Setting the cruise control a desired speed and then at applying the brake will end cruise control function. the To increase your speed very small amounts, move in the switch to R/A less than half a second and then for release it. Each time you do this, your vehicle will go about 1 mph (1.6 km/h) faster. The accelerate feature will only work after have set you the cruise control speed pushing the SET button. by 25 Once you're going about mph (40 W h ) or more, you can move the cruise control switch ON to from R/A (Resume/Accelerate) briefly to reset. This returns you to your desired preset speed. Reducing SpeedW1~" Using Cruise Control : If you holdthe switch at R/A longer than half a second, There are two ways to reduce your speed while using the vehicle will accelerate until you release switch or the cruise control: apply the brake.So unless you want to go faster, don't Push in the button at the end the lever until you of hold the switch at R/A. reach a desired lower speed then release it. Increasing Speed While Using Cruise Control 0 To slow down in very small amounts, push the There are two ways to to a higher speed: go button briefly. Each time you do this, you'll go 1 mph (1.6 km/h) slower. 0 Use the accelerator pedal togo to a higher speed. Push the SET button at the endthe lever, then of Passing Another Vehicle While Using Cruise Contro release the button and the accelerator pedal. You'll now cruise at the higher speed. Or, Use the accelerator pedal to increase your speed. Whe you take your foot off the pedal, your vehicle will slow 0 Move the cruise switch from ON to WA. Hold it down to the cruise control speed you set earlier. there until you reach a desired speed and then release the switch. 2-39