2000 Buick LeSabre Owner's Manual - Page 105

yellowblue Personal Choice Programming This feature can be programmed in the on or off mode for each transmitter. Vehicles are delivered with this feature on. To turn the feature off: 1. Close all the doors and turn the ignition on. Keep all doors closed throughout this procedure. 2. Press and hold LOCK on the power door lock switch throughout this procedure. All the doors will lock. 3. Press the instant alarm on the transmitter. Perimeter lighting remains on at this time and the horn will chirp two times. 4. Press the instant alarm on the transmitter again. Perimeter lighting is disabled and the horn will chirp one time. 5. Release the door lock switch. The perimeter lighting feature is now off. To turn the feature on: 1. Close all the doors and turn the ignition on. Keep all doors closed throughout this procedure. 2. Press and hold LOCK on the power door lock switch throughout this procedure. All the doors will lock. 3. Press the instant alarm on the transmitter. Perimeter lighting is now remains off at this time and the horn will chirp one time. 4. Press the instant alarm on the transmitter again. Perimeter lighting is now enabled and the horn will chirp two times. 5. Release the door lock switch. The perimeter lighting feature is now on. This procedure only changes the mode for the transmitter used to change this setting. The procedure will need to be repeated for the second transmitter. If your vehicle is equipped with the Driver Information Center (DIC), you must program this feature through the DIC. See "Driver Information Center" in the Index. 2-48