2000 Buick Park Avenue Owner's Manual - Page 302

Rear Turn Signal/Stoplamp 1. Open the trunk. On either side of the rear of the trunk is a plastic retainer that holds the cargo net and taillamp assembly in place. 2. Unhook the cargo net from the cargo net retainer and remove the retainer by turning it counterclockwise. 3. Remove the plastic retaining screws on the trunk's interior. 4. Pull back the trunk trim panel. 5. Beneath the trim panel are three nuts that secure the taillamp assembly. Remove these nuts with a 10 mm wrench. Remove the nuts from only the side you want to access. The turn signal and a stoplamp can now be accessed. 6-40