2000 Buick Park Avenue Owner's Manual - Page 71

2000 Buick Park Avenue Manual

Page 71 highlights

To change modes: 1. Close all the doors and turn the ignition on. Keep all doors closed throughout this procedure. 2. Press and hold LOCK on the power door lock switch on the driver's door through Step 4. 3. Press the button with the lock symbol on the remote keyless entry transmitter to enter the programming mode. The memory door lock mode will remain in the current mode. 4. Press the button with the lock symbol on the transmitter again. Each time the button with the lock symbol is pressed, the mode will advance by one, going from Mode 3 to Mode 0 to Mode 1, etc. For each press of the button with the lock symbol, the door locks will activate in the same manner they would activate in the corresponding memory door lock mode. For example, pressing the button with the lock symbol on the transmitter to advance to Mode 2 would result in all doors locking and then, only the driver's door would unlock. For Mode 0, no locking or unlocking will occur. 5. Release the power door lock switch and turn the ignition off. The automatic door locks will remain in the most recent mode selected. You can also program the automatic door locks feature using the Driver Information Center. See "Driver Information Center Personal Choice Programming" in the Index. Delayed Locking This feature lets the driver delay the actual locking of the vehicle. When the power door lock switch or the remote keyless entry button with the lock symbol is pressed with the key removed from the ignition and the driver's door open, a chime will sound three times to signal that the lock delay mode is active. When all doors have been closed, the doors will lock automatically after five seconds. If any door is opened before this, the five-second timer will reset itself once all the doors have been closed again. Pressing the door lock switch or the remote keyless entry button with the lock symbol a second time will override this feature. The delayed locking feature can be turned on or off for each remote keyless entry transmitter. 2-6

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.