2009 Buick LaCrosse Owner's Manual - Page 207

Finding a Station BAND: Press to choose between FM1, FM2, AM, or XM1 or XM2. The radio seeks and scans stations only with a strong signal that are in the selected band. SCAN: On the radio with six-disc CD, press until SC displays. The radio goes to a station, plays for a few seconds, and then goes to the next station. Press again to stop scanning stations. The radio scans stations only with a strong signal that are in the selected band. INFO (Information) (XM Satellite Radio Service Only): The vehicle's radio may have an INFO button. If the current station on the radio has a message, the information symbol displays. Press to see the message. If the entire message is not displayed, parts of the message appears every three seconds. To manually scroll through the message, press and release the INFO button. When a message is not available from a station, NO INFO displays. e (Tune): Turn to select radio stations. o SEEK p: Press and release to go to the previous or the next station and stay there. To scan stations, press and hold either arrow for more than two seconds. SCAN or SCN displays and the radio beeps once. The radio goes to a station, plays for a few seconds, and then goes to the next station. Press either arrow again or one of the pushbuttons to stop scanning presets. To scan preset stations, press and hold either arrow for more than four seconds. PSCAN or PSC displays and the radio beeps twice. The radio goes to a preset station, plays for a few seconds, then goes to the next preset station. Press either arrow again or one of the pushbuttons to stop scanning presets. 3-85