2010 Buick Enclave Owner's Manual - Page 130

5-12 Instruments and Controls The power outlet is not designed for the following electrical equipment and may not work properly if these items are plugged into the power outlet: . If equipment is connected using more than 150 watts or a system fault is detected, a protection circuit shuts off the power supply and the indicator light turns off. To reset the circuit, unplug the item and plug it back in or turn the Remote Accessory Power (RAP) off and then back on. See Retained Accessory Power (RAP) on page 9‑19. The power restarts when equipment using 150 watts or less is plugged into the outlet and a system fault is not detected. Warning Lights, Gages, and Indicators Warning Lights, Gauges, and Indicators Warning lights come on when there could be a problem with a vehicle function. Some warning lights come on briefly when the engine is started to indicate they are working. Gages can indicate when there could be a problem with a vehicle function. Often gauges and warning lights work together to indicate a problem with the vehicle. When one of the warning lights comes on and stays on while driving, or when one of the gauges shows there may be a problem, check the section that explains what to do. Follow this manual's advice. Waiting to do repairs can be costly and even dangerous. Equipment with high initial peak wattage such as: compressor-driven refrigerators and electric power tools. Other equipment requiring an extremely stable power supply such as: microcomputer-controlled electric blankets, touch sensor lamps, etc. . See High Voltage Devices and Wiring on page 10‑30.