2011 Buick Lucern Owner's Manual - Page 39

Memory Seat and Mirrors On vehicles with the memory feature, the controls on the driver door are used to program and recall memory settings for the driver seat, outside mirrors, and the power steering column, if the vehicle has this feature. 1: Saves and recalls for driver 1. 2: Saves and recalls for driver 2. To recall the memory positions, press and release "1" or "2." The vehicle must be in P (Park). A single beep will sound. The seat, outside mirrors, and power steering column, if equipped, will move to the positions previously stored for the identified driver. Memory Remote Recall The memory feature can recall the driver seat, outside mirrors, and power steering column, if equipped, to stored positions when entering the vehicle. To activate memory remote recall, unlock the driver door with the Remote Keyless Entry (RKE) transmitter. The driver seat, outside mirrors, and power steering column will move to the memory positions associated with the transmitter used to unlock the vehicle. The automatic recall feature can be turned on or off using the vehicle customization menu. See "Memory Seat Recall" under DIC Vehicle Customization on page 4 ‑ 58 for more information. S (Easy Exit Positions): Recalls the easy exit driver seat and power steering column positions. Storing Memory Positions To save into memory: 1. Adjust the driver seat, seatback recliner, lumbar, both outside mirrors, and the power steering column, if equipped. 2. Press and hold "1" until two beeps sound. 3. Repeat for a second driver position using "2." 2-7