2012 Buick Enclave Owner's Manual - Page 129

Instruments and Controls 3. Press the set/reset button to start the compass calibration. 4. The DIC will display CALIBRATING: DRIVE IN CIRCLES. Drive the vehicle in tight circles at less than 8 km/h (5 mph) to complete the calibration. The DIC will display CALIBRATION COMPLETE for a few seconds when the calibration is complete. The DIC display will then return to the previous menu. 3. Press the pushbutton located under any one of the labels to be changed. 4. To increase the time or date, do one of the following: . 5-9 To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year: 1. Press G and then the pushbutton located under the forward arrow that displays on the radio screen until the time 12H (hour) and 24H (hour), and the date MM/DD (month and day) and DD/MM (day and month) display. 2. Press the pushbutton located under the desired option. 3. Press G again to apply the selected default, or let the screen time out. Press the pushbutton below the selected label. ... ¨ SEEK. Press \ FWD. Turn f clockwise. Press Clock To adjust the time and date: 1. Turn the ignition key to ACC/ACCESSORY or ON/RUN, then press O to turn the radio on. 2. Press G to display HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year). 5. To decrease the time or date, do one of the following: ... © SEEK. Press s REV. Turn f counterclockwise. Press