2012 Buick Regal Owner Manual - Page 309

Vehicle Care Front Turn Signal/Parking/ Sidemarker Lamps (Base and Uplevel) To replace the front turn signal, parking lamp, or sidemarker lamp: 1. For the driver side bulb, remove the windshield washer bottle filler neck by firmly pulling it straight up and out of the bottle. 2. Remove the bulb socket from the headlamp assembly by turning it counterclockwise. 3. Remove the bulb from the socket. 4. Replace the bulb in the bulb socket. 5. Install the bulb socket in the headlamp assembly by turning it clockwise. 6. For the driver side, reinstall the windshield washer bottle filler neck by firmly pushing it straight into the bottle. Ensure that the filler neck clip engages into the underhood electrical center retainer. 10-35 Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps Fog Lamps To replace the fog lamp bulb: 1. Locate the bulb assembly under the front fascia. 2. Disconnect the electrical connector from the bulb assembly. 3. Remove the bulb by turning it counterclockwise and pulling it straight out of the assembly. 4. Install the new bulb by turning it clockwise into the assembly. 5. Reconnect the electrical connector to the bulb assembly. A. Taillamp/Sidemarker Lamp B. Taillamp C. Stop/Turn Signal Lamp D. Back-up Lamp To replace any one of these bulbs: 1. Open the trunk. See Trunk Release on page 1￿6. 2. Remove the taillamp assembly access panel.