2013 Buick Regal Owner Manual - Page 108

5-4 Instruments and Controls wipes may occur depending on how long the windshield washer had been activated. See Washer Fluid on page 10‑23 for information on filling the windshield washer fluid reservoir. Wipe Parking If the ignition is turned to LOCK/ OFF while the wipers are on LO, HI, or INT, they will immediately stop. If the windshield wiper lever is then moved to off before the driver door is opened or within 10 minutes, the wipers will restart and move to the base of the windshield. If the ignition is turned to LOCK/ OFF while the wipers are performing wipes due to windshield washing, the wipers continue to run until they reach the base of the windshield. INT: (Intermittent Wipes): Move the lever up to INT for intermittent wipes, then turn the 3 INT band up for more frequent wipes or down for less frequent wipes. OFF: Use to turn the wipers off. { WARNING In freezing weather, do not use the washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision. Clear snow and ice from the wiper blades and windshield before using them. If frozen to the windshield, carefully loosen or thaw them. Damaged blades should be replaced. See Wiper Blade Replacement on page 10‑28. Heavy snow or ice can overload the wiper motor. 8 (Mist): For a single wipe, briefly move the wiper lever down. For several wipes, hold the wiper lever down. Compass There is a compass display in the Driver Information Center (DIC). The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak, and vehicle speed information. Pull the windshield wiper lever toward you to spray windshield washer fluid and activate the wipers. The wipers will continue until the lever is released or the maximum wash time is reached. When the windshield wiper lever is released, additional n L (Windshield Washer):