2013 Buick Regal Owner Manual - Page 37

Keys, Doors, and Windows 3. Repeat Step 2 two additional times. After the third time all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE # 1. cupholder. The cupholder liner will need to be pulled out to access the transmitter pocket. 5. Press the START STOP button. When the transmitter is learned, the DIC will show that it is ready to program the next transmitter. 6. Remove the transmitter from the transmitter pocket and press K. To program additional transmitters, repeat Steps 4-6. When all additional transmitters are programmed, press and hold the START STOP button for 10 seconds to exit programming mode. To start the vehicle: 2-7 1. Remove the cupholder liner from the center console cupholder. Starting the Vehicle with a Low Transmitter Battery If the transmitter battery is weak, the DIC may display NO REMOTE DETECTED when you try to start the vehicle. The REPLACE BATTERY IN REMOTE KEY message may also be displayed at this time. 2. Place the transmitter in the transmitter pocket with the buttons facing up. 4. Place the new transmitter into the transmitter pocket with the buttons facing up. The transmitter pocket is located inside the center console