2015 Buick Verano Owner Manual - Page 112

Instruments and Controls open area where it can receive a GPS signal. The compass system will automatically determine when a GPS signal is restored and provide a heading again. See Compass Messages on page 5-27 for the messages that may be displayed for the compass. 3. Turn the TUNE/MENU knob to adjust the highlighted number. 4. Press TUNE/MENU to select the next number. 5. To save the time and return to the Time and Date menu, press / BACK at any time or press the TUNE/MENU knob after adjusting the minutes. Setting the 12/24 Hour Format 1. Press the CONFIG button and select Time and Date or press H. 2. Highlight 12/24 Hour Format. 3. Press TUNE/MENU to select the 12 hour or 24 hour display format. To set the time: 5-5 Clock The infotainment system controls are used to access the time and date settings through the menu system. The clock menu can be only be used with the radio on while in ON/RUN or ACC/ACCESSORY. See Operation on page 7-4 for information about how to use the menu system. 1. Press the CONFIG button to enter the menu options or press H. Turn the TUNE/MENU knob to scroll through the available setup features and select Time and Date. Press TUNE/MENU or press the Time screen button to display other options within that feature. 2. Press + or − to increase or decrease the Hours and Minutes displayed on the clock. If auto timing is set, the time displayed on the clock may not update immediately when driving into a new time zone. 12/24 HR Format: Press the 12 HR screen button for standard time; press the 24 HR screen button for military time. Day + or Day −: Press the Day + or Day − display buttons to increase or decrease the day. Setting the Clock (Radio with CD) To set the time: 1. Press the CONFIG button and select Time and Date or press H. 2. Select Set Time. Setting the Clock (Radio with CD and Touch Screen) The clock is in the center stack display.