2015 Buick Verano Owner Manual - Page 233

9-36 Driving and Operating SET/− (Set/Coast): Move the thumbwheel down briefly to set the speed and activate cruise control. If cruise control is already active, use to decrease speed. The cruise control indicator on the instrument cluster turns green after cruise control has been set to the desired speed. See Instrument Cluster on page 5-9. Resuming a Set Speed If the cruise control is set at a desired speed and then the brakes are applied or * is pressed, the cruise control is disengaged without erasing the set speed from memory. Once the vehicle speed is about 40 km/h (25 mph) or greater, move the thumbwheel up toward RES/+ briefly. The vehicle returns to the previously set speed. Increasing Speed While Using Cruise Control If the cruise control system is already activated: . * (Cancel): Press to disengage cruise control without erasing the set speed from memory. Setting Cruise Control 1 (On/Off): Press to turn the cruise control system on or off. A white indicator comes in the instrument cluster when cruise is turned on. RES/+ (Resume/Accel): If there is a set speed in memory, move the thumbwheel up briefly to resume to that speed or hold upward to accelerate. If cruise control is already active, use to increase vehicle speed. If 1 is on when not in use, SET/- or RES/+ could get bumped and go into cruise when not desired. Keep 1 off when cruise control is not being used. To set a speed: 1. Press 1 to turn cruise control on. 2. Get up to the speed desired. 3. Move the thumbwheel down toward SET/− and release it. 4. Remove your foot from the accelerator. Move the thumbwheel up toward RES/+ and hold it until the desired speed is reached, then release it.