2000 Cadillac Eldorado Owner's Manual - Page 90

If the turn signal is left on, a warning chime will sound and the Driver Information Center (DIC) will display TURN SIGNAL ON (after driving about 1 mile (1.6 km/h)) to remind you to turn it off. Arrows that flash rapidly when signaling for a turn or lane change may be caused by a burned-out signal bulb. Other drivers won't see the turn signal. Replace burned-out bulbs to help avoid possible accidents. Check the fuse (see "Fuses and Circuit Breakers" in the Index) and for burned-out bulbs if the arrow fails to work when signaling a turn. Flash-To-Pass This lets you use the high-beam headlamps to signal the driver in front of you that you want to pass. Pull the turn signal lever toward you to use. When you do: D If the headlamps are either off or in the Daytime Running Lamps (DRL) mode, the high-beam headlamps will turn on. They'll stay on as long as you hold the lever there. Release the lever to turn them off. Headlamp High/Low Beam Changer This light located on the instrument panel panel will be on when the high beam headlamps are in use. D If the headlamps are on low beam, they will shift to high beam and stay there. Pull the lever toward you to return to low beam. to low beam. To return to high beam, pull the lever toward you. D If the headlamps are on high beam, they will switch Pull the turn signal lever all the way toward you and then release it to change the headlamps from low beam to high or from high beam to low. 2-31