2007 Cadillac SRX Owner's Manual - Page 13

Two personalized exit positions can also be programmed. Use the following steps to program exit positions: 1. Press memory seat button 1 or the button with the unlock symbol on the remote keyless entry transmitter with the number 1 on the back to recall the driving position. 2. Adjust the driver's seat to the desired exit position. 3. Press and hold the exit button located above buttons 1 and 2 on the driver's door armrest for at least three seconds. Two beeps will sound to confirm that the exit position has been saved. 4. Repeat the procedure for a second driver using memory seat button 2 or the remote keyless entry transmitter with the number 2 on the back. To recall the stored exit positions, press and release the exit button. One beep will sound, and the seat will move to the previously stored exit position for the currently identified driver. If an exit position has not been stored for this driver, the seat will move all the way back. The position of the outside mirrors is not stored or recalled for the exit position. The vehicle must be in PARK (P) to recall the exit positions. A chime will sound and the exit setting will not be recalled if you press the exit button when the vehicle is not in PARK (P). If you would like your stored exit position to be recalled when unlocking the vehicle with the remote keyless entry transmitter or when the ignition is turned off and the driver's door is opened, see DIC Vehicle Customization on page 231. 13