2007 Cadillac SRX Owner's Manual - Page 429

2. If it is visible, first try to tighten the cable by turning the wheel wrench clockwise until you hear two clicks or feel it skip twice. You cannot over-tighten the cable. 3. Loosen the cable then by turning the wrench counterclockwise three or four turns. 4. Tighten the cable all the way and then loosen it at least two times, if the spare tire has not lowered. If the spare tire did lower to the ground, continue with Step 4 under Removing the Spare Tire and Tools on page 426. If you still cannot lower the spare tire to the ground, see Secondary Latch System on page 436. Removing the Flat Tire and Installing the Spare Tire To remove the flat tire and install the spare, do the following: 1. Loosen the wheel nuts, but do not remove them yet, using the wheel wrench. Turn the handle about 180 degrees, then flip the handle back to the starting position. This avoids taking the wrench off the lug nut for each turn. 429