2007 Cadillac XLR-V Owner's Manual - Page 100

Torque Lock If you are parking on a hill and you do not shift your transmission into PARK (P) properly, the weight of the vehicle may put too much force on the parking pawl in the transmission. You may find it difficult to pull the shift lever out of PARK (P). This is called "torque lock." To prevent torque lock, set the parking brake and then shift into PARK (P) properly before you leave the driver's seat. To find out how, see "Shifting Into PARK (P)" listed previously in this section. When you are ready to drive, move the shift lever out of PARK (P) before you release the parking brake. If torque lock does occur, you may need to have another vehicle push yours a little uphill to take some of the pressure from the parking pawl in the transmission, so you can pull the shift lever out of PARK (P). Shifting Out of Park (P) Your vehicle has an automatic transmission shift lock control system. You have to fully apply your regular brake before you can shift from PARK (P) when the vehicle is running. See Automatic Transmission Operation on page 92. If you cannot shift out of PARK (P), ease pressure on the shift lever - push the shift lever all the way into PARK (P) and release the shift lever button as you maintain brake application. Then press the shift lever button and move the shift lever into the gear desired. If you ever hold the brake pedal down but still cannot shift out of PARK (P), try this: 1. Press the regular bake. 2. Press the Acc. button twice to place the ignition in accessory mode. 3. Apply and hold the brake until the end of Step 4. 4. Shift to NEUTRAL (N). 5. Start the engine and then shift to the drive gear you want. 6. Have your vehicle inspected by your dealer as soon as possible. 100