2008 Cadillac CTS Owner's Manual - Page 147

Flash-to-Pass This feature allows you to use the high-beam headlamps to signal the driver in front of you that you want to pass. Pull and hold the turn signal/multifunction lever toward you to use this feature. When this is done the following will occur: Windshield Wipers • If the headlamps are off, in low-beam or in Daytime Running Lamps (DRL) mode, the high-beam headlamps will turn on. They will stay on as long as the lever is held there. Release the lever to turn them off. The lever on the right side of the steering column operates the windshield wipers. • For vehicles with High Intensity Discharge (HID) headlamps, the low-beam headlamps must be on to activate the high-beam headlamps. See High Intensity Discharge (HID) Lighting on page 5-55. 7 (Mist): Pull the lever down and release it for a single wiping cycle. The lever will return to its original position. For more cycles, hold the lever down before releasing it. • If the headlamps are already in high-beam mode, they will remain on high-beam. & (Delay): Move the lever to this position to set a delay between wipes. Turn the delay adjustment band to set the length of the delay. Use this band to set the length of the delay between wipes when using the delay feature. The closer the band is moved towards 7, the longer the delay. The windshield wiper lever must be in delay for this feature to work. 6 (Delay Adjustment): 3-9