2009 Cadillac XLR-V Owner's Manual - Page 130

If after signaling a turn or a lane change the arrows flash rapidly or do not come on, a signal bulb could be burned out. Have the bulbs replaced. If the bulb is not burned out, check the fuses. See Fuses and Circuit Breakers on page 6-83. Flash-to-Pass This feature lets you use the high-beam headlamps to signal the driver in front of you that you want to pass. Pull and hold the turn signal lever toward you to use. When you do, the following will occur: Turn Signal on Chime A chime will remind you if the turn signal is left on for more than 3/4 mile (1.2 km) of driving. If you need to leave the turn signal on for more than 3/4 mile (1.2 km), turn off the signal and then turn it back on. • If the low-beam headlamps are on, the high-beam headlamps will turn on. They will stay on as long as you hold the lever there. Release the lever to turn them off. • If the headlamps are on high-beam, they will switch to low-beam. To return to high beam, push the lever away from you. Headlamp High/Low-Beam Changer Push the turn signal lever all the way forward to change the headlamps from low beam to high beam. When the high beams are on, this light the instrument panel cluster. Windshield Wipers $ appears on Pull the lever rearward to change the headlamps back to low beam. The windshield wiper lever is located on the right side of the steering column. 3-8