2012 Cadillac Escalade Owner's Manual - Page 175

2012 Cadillac Escalade Manual

Page 175 highlights

Lighting Turning On and Enabling IntelliBeam Press and release the IntelliBeam button on the inside rear view mirror. The IntelliBeam indicator on the mirror will turn on to let you know the system has been turned on. Once the system has been turned on, it will remain on each time the vehicle is started. Additionally, the IntelliBeam system must be enabled. To enable the IntelliBeam system, turn the exterior lamp control to AUTO, with the turn signal/ multifunction lever in its neutral position. The High-Beam On Light will appear on the instrument panel cluster when the high-beams are on. Driving with IntelliBeam IntelliBeam will only activate your high-beams when driving over 32 km/h (20 mph). The high-beam headlamps will remain on, under the automatic control of IntelliBeam, until any of the following situations occur: . . 6-3 The system detects an approaching vehicle's headlamps. The system detects a preceding vehicle's taillamps. The outside light is bright enough that high-beam headlamps are not required. The vehicle's speed drops below 24 km/h (15 mph). The headlamp stalk is moved forward to the high-beam position. When either of these conditions occur, the IntelliBeam feature will be disabled and the IntelliBeam light in the mirror will turn off until the high-beam stalk is returned to the neutral position. If IntelliBeam was using low-beams prior to this action, the IntelliBeam feature will be temporarily disabled until the stalk is returned to the neutral position. The exterior lamp control is turned to any setting except AUTO. When this occurs, IntelliBeam will be disabled until the control is turned back to the AUTO position. . . . . . The IntelliBeam system is turned off at the inside rearview mirror. . IntelliBeam may not turn off the high-beams if the system cannot detect other vehicle's lamps because of any of the following: . The others vehicle's lamp(s) are missing, damaged, obstructed from view or otherwise undetected. The other vehicle's lamp(s) are covered with dirt, snow and/or road spray. .

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.