2012 Cadillac Escalade Owner's Manual - Page 407

Vehicle Care 5. Pull the old bulb straight out from the socket. 6. Press a new bulb into the socket, insert the socket into the taillamp assembly and turn the socket clockwise into the taillamp assembly until it clicks. 7. Reinstall the taillamp assembly. When reinstalling, make sure to line up the pins on the taillamp assembly with the vehicle. If the pins do not line up correctly, the taillamp assembly will not be able to be installed properly. If the taillamp, stoplamp, or turn signal need to be replaced, see your dealer for service. 10-37 License Plate Lamp 3. Remove the bulb socket from the lamp assembly by turning it counterclockwise. 4. Pull the bulb straight out of the socket and install the new bulb. 5. Reverse Steps 1 through 3 to reinstall the license plate lamp. Replacement Bulbs Exterior Lamp Back-up Lamp 1. Remove the two screws holding each of the license plate lamps to the molding that is part of the liftgate. 2. Twist and pull the license plate lamp assembly forward through the molding opening. License Plate Lamp Bulb Number 7441 168LL (W5WLL) For replacement bulbs not listed here, contact your dealer.