2012 Cadillac Escalade Owner Manual - Page 71

Vehicle Care 10-29 Storing the Tire Sealant and Compressor Kit The tire sealant and compressor kit is located under the storage tray on the driver side trim panel (over the rear wheelhouse). To access the tire sealant and compressor kit: Jump Starting { WARNING Personal injury, death, or damage to the vehicle can result if you try jump starting or using a battery charger on the high voltage hybrid battery. Use only the 12-volt battery for jump starting and charging. 2. Locate the tire sealant and compressor kit. 3. Remove the sealant and compressor kit by pulling the velcro strip up and back. 4. Remove the sealant and compressor kit from its plastic tray assembly. For more information about the vehicle battery, see Battery on page 10‑11. 1. Remove the tray by pulling up on the finger depression to access the tire sealant and compressor kit. To store the tire sealant and compressor kit, reverse the steps.