2014 Cadillac Escalade ESV Owner Manual - Page 432

10-78 Vehicle Care 2. Assemble wheel blocks (A) and jack (E) together with the wing nut retaining the wheel blocks (F). 3. Position the jack (E) and wheel blocks (A) in the driver side trim panel over the wheelhouse. 4. Turn the jack knob (G) clockwise until the jack is secured tight in the mounting bracket. Be sure to position the holes in the base of the jack onto the pin in the mounting bracket. 5. Use the retaining bracket (C) to fasten the tool bag (B) on the stud and turn the wing nut retaining the tool bag (D) clockwise to secure. Secondary Latch System This vehicle has an underbody-mounted tire hoist assembly equipped with a secondary latch system. It is designed to stop the spare tire from suddenly falling off your vehicle. For the secondary latch to work, the spare must be installed with the valve stem pointing down. See "Storing a Flat or Spare Tire and Tools" under Tire Changing on page 10-69. Regular Wheelbase shown, Extended Wheelbase similar. 6. Return the storage tray to its original stored position. { Warning Before beginning this procedure read all the instructions. Failure to read and follow the instructions could damage the hoist assembly and you and others could get hurt. Read and follow the instructions listed next.