1995 Chevrolet Corvette Owner's Manual - Page 99
1995 Chevrolet Corvette Manual
Page 99 highlights
Installing the Roof Panel 3. Lower the roof panel onto the vehicle, rear edge first, and place the rear guide pinsinto the holes in the roof opening. 4. Lower the front of the roof panel,and align the front guide pins. 5. Tighten the rear bolts part way. I 1. Park on a level surface, set the parking brake firmly and shift an automatic transmission into PARK (P). Shift a manual transmission into REVERSE(R). Lower both windows, turn the ignition key to LOCK and move both sunshades to the side. NOTICE: If you tighten bolts that are improperly started, the threads can become stripped. Be sure all bolts are properly started before you tighten them. 6. Use the ratchet to start the front bolts. If the bolts are hard to start, tighten the rear bolts some more. Holding down the panel on theoutside will also help. 7. Fully tighten the rear bolts, then the front bolts. If you hear a popping noise when you drive, the bolts may not be tight enough. Be sure to tighten them securely. 2. If the roof panel is stored in the rear area, remove it by reversing the steps under "Storing the Roof Panel" above.