2000 Chevrolet Lumina Owner's Manual - Page 256

4. Unscrew the two remaining wing nuts. 5. Pull the assembly from the body carefully. 6. To remove a socket, press the tab, turn the socket counterclockwise and pull it out. 7. Pull the bulb out. Do not twist it. 8. Push the new bulb into the socket. 9. Put the socket back into the assembly. 10. Tighten the socket by turning it clockwise. 11. Install the assembly and the two lower wing nuts. 12. Put the carpeting back into place. 13. Reinstall the upper (convenience net) wing nut and the convenience net, if equipped. Back-Up Lamp 1. Open the trunk. The back-up lamp bulbs are in the rear of the trunk lid. 2. Press the tab on the socket, turn the socket counterclockwise and pull it out. 3. To remove the bulb, pull it out of the socket. Do not twist the bulb. 4. Push the new bulb into the socket. 5. Reverse Steps 1 and 2 to reinstall the socket. 6-36