2002 Chevrolet Suburban Owner's Manual - Page 12

Power Lumbar Control (If Equipped) If your vehicle has this feature, the four-way control is located on the outboard side of the seat. Memory Seat (If Equipped) If your vehicle has this feature, the buttons used to program and recall the driver's seat and recliner position are located on the driver's door trim panel. To increase or decrease support, press and hold the front or rear of the control. Let go of the control when the lower seatback reaches the desired level of support. You can also reshape the side wing area of the lower seatback for more lateral support. To increase or decrease support, press and hold the top or bottom of the control. Let go of the control when the lower seatback reaches the desired level of support. It does not store the lumbar or back support positions. To program the memory seat, do the following: 1. Adjust the driver's seat to the desired position. 2. Then press the SET button and, within five seconds, press one of the two numbered buttons on the memory control. To recall your setting, put the vehicle in PARK (P) and press the number you chose. To program the seat position for a second driver, follow the preceding steps, but press the other number on the memory control. 1-5