2005 Chevrolet Silverado 2500 Pickup Owner's Manual - Page 163
2005 Chevrolet Silverado 2500 Pickup Manual
Page 163 highlights
Easy Exit Seat The controls for this memory function are located on the driver's door. To use the seat exit position, do one of the following: • If you have an automatic transmission, press and release the exit button on the memory control while the vehicle is in PARK (P). B (Easy Exit Seat): This button is used to program and recall the desired driver's seat position when exiting/entering the vehicle. The seat position can be saved for up to two drivers. To store the seat exit position, do the following: 1. If you have an automatic transmission, place the vehicle in PARK (P). If you have a manual transmission, set the parking brake. 2. Press and release the 1 or 2 button. The seat will move to the stored memory position. 3. Adjust the seat to the desired exit position. 4. Press and hold the exit button of the memory control for three seconds. A double chime will sound to let you know that the position has been stored for the selected button 1 or 2. To repeat the procedure for a second driver, follow the preceding steps, but press the other numbered memory control button. • If you have a manual transmission, press and release the exit button on the memory control while the parking brake is set. • Or, if this feature is activated in the DIC, removing the key from the ignition will move the seat to the exit position. See "Easy Exit Seat" under DIC Vehicle Customization on page 3-63 for more information on activating this feature in the DIC. 2-77