2005 Chevrolet Venture Owner's Manual - Page 26

3. If the power sliding door override is on, press the textured end of the power sliding door override switch to turn it off. 4. Remove fuse 29 from the underhood fuse block. Leave it out for 30 seconds. 5. Reinstall the fuse and wait 10 seconds. 6. Turn the power sliding door override on by pressing the end of the switch with the override symbol on it. 7. Press the power sliding door switch(es) to open the power sliding door. 8. Open the door all of the way. 9. Wait five seconds and close the door by pressing the power sliding door switch(es). 10. Wait five seconds and repeat Steps 7 through 9. If the door does not rest in the fully open position after repeating Step 7, repeat Steps 7 through 9 again. If the door still does not operate correctly, see your dealer for service. Liftgate To unlock or lock the liftgate from the outside, use the remote keyless entry transmitter. For more information, see Remote Keyless Entry System Operation on page 2-5. Open the liftgate using the handle located above the license plate. Once slightly opened, the liftgate will rise by itself. Lamps in the rear of the vehicle will come on, illuminating the rear cargo area. Notice: If you open the liftgate without checking for overhead obstructions such as a garage door, you could break the liftgate glass. Always check to make sure the area above the liftgate is clear before opening it. 2-20