2006 Chevrolet Aveo Owner's Manual - Page 123

Setting Cruise Control The cruise control pad is located on the right side of the steering wheel. 1. Press the ON OFF button (A) to turn cruise control on. 2. Accelerate to the speed you want. 3. Press the SET button and release it. The cruise control light will come on to show you that the cruise control is on. 4. Take your foot off the accelerate pedal. {CAUTION: If you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control. Resuming a Set Speed Suppose you set your cruise control at a desired speed and then you apply the brake pedal, or the clutch pedal if you have a manual transaxle. This, of course, shuts off the cruise control. But you do not need to reset it. Once you are going about 24 mph (39 km/h) or more, you can briefly press the RESUME button. You will go right back up to your chosen speed and stay there. If you hold in the RESUME button longer, the vehicle will keep going faster until you release the button or apply the brake pedal. So unless you want to go faster, do not hold in the RESUME button. 3-11