2006 Chevrolet Tahoe Owner's Manual - Page 421

To replace a front turn signal, sidemarker or DRL bulb, do the following: 1. Open the hood. See Hood Release on page 5-11 for more information. 2. Remove the headlamp assembly as described previously. See Headlamps on page 5-51 for more information. 5. Press the locking release lever, turn the bulb socket counterclockwise and remove it from the turn signal assembly. 6. Remove the old bulb from the bulb socket. 7. Install a new bulb into the bulb socket. 8. Insert the bulb socket into the turn signal assembly and turn it clockwise until it locks. 9. Reinstall the turn signal assembly back into the vehicle placing the hook and posts on the inner side into the alignment holes first, then the outer side into the retainer bracket until you hear a click. 10. Reinstall the headlamp assembly. 3. Press the retainer clip (B), located behind the turn signal assembly, towards the outside of the vehicle. 4. Pull the turn signal assembly out of the vehicle. 5-53