2007 Chevrolet Equinox Owner's Manual - Page 380

License Plate Lamp To replace one of these bulbs, do the following: 1. Remove the two screws holding each of the license plate lamps to the liftgate handle. Replacement Bulbs Exterior Lamp Back-Up Lamp Front Parking Lamp Front Sidemarker Lamp Front Turn Signal Lamp License Plate Lamp Low/High-Beam Lamp Rear Sidemarker Lamp Rear Turn Signal Lamp/Taillamp Stoplamp/Taillamp Bulb Number 921 194 N/A 168 1156 N/A 9421330 9007 W5W 1157 1157 For replacement bulbs not listed here, contact your dealer. 2. Turn and pull the license plate lamp down through the liftgate opening. 3. Turn the bulb socket counterclockwise and pull the bulb straight out of the socket. 4. Install the new bulb. 5. Reverse Steps 1 through 3 to reinstall the license plate lamp. Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear or cracking. See Scheduled Maintenance on page 439 for more information. Replacement blades come in different types and are removed in different ways. For proper type and length, see Normal Maintenance Replacement Parts on page 449. 380