2007 Chevrolet Impala Owner's Manual - Page 136

6. Press and hold the button you would like to use to control the garage door until the garage door moves. The indicator light above the selected button should slowly blink. You may need to hold the button from five to 55 seconds. 7. Immediately release the button when the garage door moves. The indicator light will blink rapidly until programming is complete. 8. Press and release the button again. The garage door should move, confirming that programming is successful and complete. 4. The indicator light will blink slowly. In order from left to right, and within two and one-half minutes, enter each switch setting into the Universal Home Remote System. Push one button for each switch as follows: • Left button = "on" switch position. • Right button = "off" switch position. • Middle button = "middle" switch position. 5. After entering the switch settings, press and release all three buttons at the same time. The indicator lights will turn on. 136 To program another device such as an additional garage door opener, a security device, or home lighting, repeat Steps 1-8, choosing a different function button in Step 7 than what you used for the garage door opener.